Agilent 1200 (G1315C) Diode Array HPLC System

Condition: Used Consignment item being sold from our warehouse on behalf of owner. Please request details.
30 DAY RIGHT TO RETURN (LESS ALL SHIPPING) IF FUNCTIONALLY DEFECTIVE
Stock #:
C413A
Status:
1 Available In Stock (request a quote)
Dimensions (approx.):
29"W x 26"D x 19"H (outside)
Electrical:
100-240 Volts, 50/60 Hz, 160vA
Product Description Consisting of the following components:
Mobile Phase tray
G1315C DAD SL
G1379B; Degasser
G1312B; BinPump SL
G1367D HiP-ALS SL+
G1316B TCC SL (thermal column compartment)

*** For a slight additional cost, we can offer a PM check by an independent third party ***

The Agilent 1200 Series G1315C Diode Array Detector SL delivers multiple wavelength and full spectral detection at sampling rates up to 80 Hz, accommodating even ultrafast liquid chromatography. At high data rates, the 1200 Series DAD SL still provides precise identification, quantification, and peak purity analysis at trace levels. This exceptional performance is particularly useful when ultrafast LC methods must comply with strict regulatory requirements.
The unit provides an expanded detection range, 190 nm to 950 nm, with the lowest detection limit. Low-noise front-end electronics and a new patented flow cell design deliver lowest detection limits as a result of minimized short-term noise.

DAD SPECIFICATIONS:
- Wavelength range: 190-950 nm
- Light source: Deuterium and tungsten lamps
- Short term noise (ASTM) single & mult-wavelength: ±0.8 °x 10-5 AU at 254 and 750 nm
- Drift: 2° x 10-3 AU / hr at 254 nm
- Linear absorbance range: > 2 AU (upper limit)
- Wavelength accuracy: ± 1 nm
- Wavelength bunching: 1 - 400 nm
- Diode width: < 1 nm
- Control and data evaluation: Agilent Chemstation for LC
- Slit width: 1, 2, 4, 8, 16 nm

The Agilent 1200 Series G1312B Binary Pump SL is based on a two-channel, dual-piston in-series design which comprises all essential functions that a solvent delivery system has to fulfill. Metering of solvent and delivery to the high-pressure side are performed by two pump assemblies which can generate pressure up to 600 bar. Each channel comprises a pump assembly including pump drive, pump head, active inlet valve with replaceable cartridge and outlet valve. The two channels are fed into a low-volume mixing chamber which is connected via a restriction capillary coil to a damping unit and a mixer. A pressure sensor monitors the pump pressure. A purge valve with integrated PTFE frit is fitted to the pump outlet for convenient priming of the pumping system.

BINARY PUMP SPECIFICATIONS:
Flow Range: 0.001-5 ml/min
Flow Precision: <0.07% RSD, or <0.02 min SD whatever is greater, based on retention time at constant room temperature
Pressure Range: 0 - 600 bar (0 - 8700 psi) up to 5 mL/min
Pressure Pulsation Less than 2% amplitude

The HP Agilent 1200 Series G1367D high performance autosampler SL HiP ALS SL plus autosampler complete with tray for (2) well plates & 10X2ml vials, (2)X54 vial plates and 600 bar Rheodyne injection valve. Injection range: 0.1 to 40uL. (600 bar). The G1367D Agilent 1200 Series High Performance Autosampler SL+ is specifically designed for the Agilent 1200 Series Rapid Resolution LC system for increased analysis speed with uncompromised sensitivity, resolution,
precision and lowest carry over.

AUTOSAMPLER SPECIFICATIONS:
- GLP features Early maintenance feedback (EMF), electronic records of maintenance and errors
- Communications Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output
- Safety features Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display
- Injection range 0.1 - 40µl in 0.1 µl increments Up to 100 µl with extended injection volume (hardware modification required)
- Pressure range Up to 600 bar (8700 psi)
- Sample viscosity range 0.2 - 5 cp
- Sample capacity 2 × well plates (MTP) + 10 × 2 ml vials 108 x 2mL vials in 2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials 54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x - 27 Eppendorf tube plate
- Also compatible with the Agilent 1200 Series sample capacity extension for further expansion of the sample capacity

The Agilent 1200 Series G1316B COLCOM is a 1200 Series G1316B thermostatted column comparment used for heating and cooling to meet extreme requirements of retention time reproducibility.

The main features are:
- Peltier heating and cooling from 10 degrees below ambient up to 80 °C(G1316A) or 100 °C with high heating and cooling speeds for maximum application flexibility and stability
- holds up to three 30-cm columns and optimized design gives minimum dead volumes and maximum efficiency
- two independently programmable heat exchangers contribute volumes of only 3 and 6 µl
- G1316B SL features additional heating and cooling devices for low flow rates, which reduce the risk of additional dispersion

THERMOSTATTED COLUMN COMPARTMENT SPECIFICATIONS:
- Temp Range: 10° below ambient to 100°C
- Temp Stability: ±0.05°C
- Temp Accuracy: ±0.5°C
- Column Capacity: Three 30cm columns
- Warm-up/Cool Down: 5 mins from ambient to 40°C

This item is being sold on consignment (it's in our warehouse, but we are selling it on behalf of its current owner). We are selling it AS IS (no extensive testing, no overhaul but we will perform minimal testing upon sale). Upon receipt of the HPLC, you will have 30 days to test the unit and return it for full refund (less all shipping charges) if you find it to be functionally defective.