Hanna Instruments HI 2314 Digital, Bench-model Conductivity Meter

Condition: New Brand new item from stock or on order from manufacturer
Stock #:
Available In Stock (request a quote)
Dimensions (approx.):
9.2"W x 8.7"D x 4.3"H (outside)
50/60 Hz,
Product Description The Hanna HI 2314 conductivity meter uses a four ring potentiometric probe with platinum sensor that offers greater versatility over typical amperometric designs. A potentiometric probe works on the principal of induction which eliminates the effects of polarization (a common problem of amperometric systems). Two outer rings apply an alternating voltage and induce a current loop in the solution while two inner rings measure the voltage drop induced by the current loop (which is dependent on the conductivity of the solution). By utilizing the 4-ring method, it is possible to measure very low or high conductivity levels (up to 200 mS/cm) without changing probes.

HI 2314 Parameter Specifications:
Range: 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
Resolution: 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
Accuracy: @ 20°C ±1% F.S. (excluding probe error)
Calibration: manual, one point
Probe: HI 76300, platinum four ring conductivity probe with DIN connector and 1 m (3.3') cable (included)
Temperature Compensation: manual, 0 to 50°C (32 to 122°F)
The following link provides additional information from the instruction manual or original manufacturer's brochure. Right-click to open the PDF in a new window or download it: