Brand new item from stock or on order from manufacturer
1 YEAR MANUFACTURER'S WARRANTY
Oxidation Stability of Fuels, Water/Liquid Bath
Provides an indication of the tendency of gasoline and aviation fuels to form gum in storage. The sample is oxidized inside a stainless steel pressure vessel initially charged with oxygen at 100psi (689kPa) and heated in a boiling water bath. The amount of time required for a specified drop in pressure (gasoline) or the amount of gum and precipitate formed after a specific aging period (aviation fuels) is determined.
Features and Benefits: Water/Liquid baths conforming to ASTM and related specifications. Constant temperature baths for heating K10500 Oxidation Pressure Vessels in accordance with ASTM specifications.
Equipped with low liquid-level controllers in accordance with the latest ASTM specifications. Two-unit water analog-controlled water bath can be flush mounted in a table top if desired, and is equipped with an overflow standpipe/drain to maintain the proper depth when the pressure vessels are inserted, and a plated brass reflux condenser to minimize evaporation loss. 6-vessel model is also available -- please request price.
The four/six-unit model can be used with water or oil as a bath medium, and has microprocessor temperature control that provides quick temperature stabilization without overshoot. Dual LED displays provide setpoint and actual temperature values in °C/°F format. A built-in overtemperature control circuit interrupts power should the bath temperature exceed a programmed cut-off point. Both models feature double-wall insulated construction with stainless steel tanks, support racks and port covers. Order thermometer separately. The four/six unit model can be ordered with interchangeable racks for performing the ASTM D942, ASTM D323 and D1298 test methods. Please contact your sales representative for additional information
Conforms to the specifications of: ASTM D525, D873; IP 40, IP 138; ISO 7536; DIN 51780, 51799; FTM 791-3352, 791-3354; NF M 07-012, 07-013
Two-Unit Liquid Bath: boiling water
Four/Six-Unit Liquid Bath: 250°F (121°C)
K10540 Glass Sample Container and Cover with pour out spout
K10510 Gasket - Replacement composition gasket for K10500 Oxidation Pressure Vessel.
K10551 Pressure Line - For pressurizing Oxidation Pressure Vessel. 6 ft. (1.83m) long, with quick release coupling for needle valve on pressure vessel and threaded fitting for oxygen tank.
K10556 Oxygen Manifold Pressure Relief System - Connects to oxygen source to prevent overcharging of vessel. Equipped with relief valve to vent at 125psi and 300 series stainless steel 150psi burst disk assembly. Constructed from 300 series stainless steel. Cleaned for oxygen service.
K10520 Wrench - For tightening seal on Oxidation Pressure Vessel.
K10530 Table Socket - Installs in benchtop to aid in tightening seal on Oxidation Pressure Vessel.
K10560 Bronze Tubing - For connecting pressure recorder to vessel. Flexible seamless helical tubing with protective armor braid and connections. 5 ft (1.52m) long.
K10525 Burst Disk Assembly - Retrofit kit for Oxidation Pressure Vessel without burst disk assembly.
250-000-22F ASTM 22F Thermometer Range: 204 to 218°F
250-000-22C ASTM 22C Thermometer Range: 95 to 103°C
The following link provides additional information from the instruction manual or original manufacturer's brochure. Right-click to open the PDF in a new window or download it: http://www.labequip.com/stock/pictures/n1169.pdf