Millipore Elix 35 (ZLXS60035) Reverse Osmosis Water Purifier

Used Lab Equipment Warranty Condition: Used Will be thoroughly tested and serviced
6 MONTH IN SHOP WARRANTY
Stock #:
35422
Status:
1 Available In Stock (request a quote)
Dimensions (approx.):
26"W x 18"D x 30"H (outside)
Electrical:
120 Volts, 60 Hz, 600vA
Product Description Analytical-grade water meets the specifications for Type II water. It is suitable for the following applications:
- Microbiological media preparation
- Buffer preparation
- Hydroponics
- Manufacturing chemical and biochemical reagents
- Pharmaceutical laboratory
- Feed to laboratory equipment: washing machines, clinical analyzers, stability chambers, humidifiers, autoclaves, weathering test equipment, hydrogen gas generators
- Feed water for Milli-Q and Super-Q ultrapure water systems

FEED WATER REQUIREMENTS:
Quality: Potable Mains (Tap) Water
Conductivity: < 2000 µS/cm (@ 25 °C)
pH: 4-10
Maximum LSI: < 0.3
Calcium (as CaCO3): < 300 ppm (when system water recovery > 50 %)
Total Chlorine level: EMD Millipore Application Specialist will determine pretreatment required
Fouling index: EMD Millipore Application Specialist will determine pretreatment required
Feed water pressure: 2 bar minimum, 6 bar maximum (29 psi min, 86 psi max)
Flow rate: > 5 l/min at 2 bar (1.3 gal/min at 29 psi)

SYSTEM PERFORMANCE:
Product flow rate (nominal flow rates, 7 to 30 °C): 35 L/hr (9.2 gal/h)
Water recovery: up to 40 %
Product water resistivity: > 5 mega-ohm·cm (typically 10 -15 mega-ohm·cm)
Conductivity: < 0.2 µS/cm (typically 0.067 - 0.10 µS/cm)
Typical TOC: < 30 ppb
Bacterial count: < 10 cfu/ml
The following link provides additional information from the instruction manual or original manufacturer's brochure. Images, specifications and description refer to the item as it was when new. Right-click to open the PDF in a new window or download it:
http://www.labequip.com/stock/pictures/35422.pdf