Brand new item from stock or on order from manufacturer
2 YEAR MANUFACTURER'S WARRANTY
The Shel-Lab SVAC1 vacuum oven is durably constructed with seamless welds and strong bracing. All SHEL LAB vacuum ovens are built with a stainless steel chamber for exceptional durability. Our double plenum design meets CE safety requirements resulting in a cool outer surface. Our unique cross-flow ventilation forces inert gas to fill the entire chamber. To achieve required vacuum levels, users can choose from a 3/8 inch orifice or a KF25 fitting to withstand heavy use and minimize draw-down time. Maximum permitted end vacuum is 10 mTorr. Leak rate is 10 mTorr per hour.
The doors on these units have positive latch handles with spring-loaded glass to facilitate a good vacuum seal without hinge binds that shorten the gasket life.
The SHEL LAB Vacuum Ovens are equipped with silicone gaskets. While these gaskets resist a wide variety of temperatures and pressures, they can breakdown in the presence of solvents and acids. For solvent applications, we recommend using Buna gaskets. For acidic applications, we recommend using Fluorosilicone or Viton gaskets.
For more information about the gaskets we offer, see our Vacuum Oven Gasket Guide.
Please note that this vacuum oven does not include a pump or related accessories. Contact your sales rep for assistance with choosing the ideal pump and accessories for any application.
Shelving: 3 Supplied
Temperature Range: 10°C above ambient to 220°C
Capacity: 1.67 Cu.Ft. (47 L)
Vacuum Range: in Hg (-3.0 to -29.9), kPa (-10 to -101), mbar (-101 to -1010)
Display Vacuum Range (Display Resolution): in Hg (0 to 29.9), kPa (5 to -101), bar (0.05 to -1.013)
Precise Temperature Control
-Heat-up Time 90 minutes to 150°C
-Temperature Adjustable by 0.1°C
-Temperature Uniformity ±6% of Set Point
-Temperature Range Ambient + 10°C to 220°C
inch Hg (-3.0 to -29.9)
kPa (-10 to -101)
mbar (-101 to -1010)
Display Range (Display Resolution)
inch Hg (0 to 29.9)
kPa (5 to -101)
bar (0.05 to -1.013)
Capable of 40 Step Ramp And Soak Profiles, Or 4 Files With 10 Steps Per File
Cross Ventilation Air Flow Design
Achieve Impressive Vacuum Levels
Sizes Range from 0.6 - 9 Cu.Ft.
Built-in Overtemperature Protection
24 Month Limited Warranty
Vacuum Oven Applications:
Out Gassing Solids
Chemical Resistance Studies
Drying of Paper
Rubber and Textiles
Out Gassing Liquids
Electronic Process Control
VACUUM PUMP REQUIRED: a pump with a pumping capacity of 6 cubic feet per minute is recommended.
The following link provides additional information from the instruction manual or original manufacturer's brochure. Right-click to open the PDF in a new window or download it: http://www.labequip.com/stock/pictures/n833.pdf