Burrell 75 Wrist-Action Shaker

Product Description
The Burrell Wrist Action Shaker duplicates the swirling action of hand mixing. The adjustment arm controls the amplitude and agitation of shaking from 0 to 15 degrees arc. Shaker operates at 385 oscillations per minute (±10%). The Shaker has a built in timer to operate from 1 to 60 minutes or can be set at continuous operation.
Custom clamps and accessories are available supporting a variety of flasks, funnels, bottles, and specimen jars to meet the most demanding laboratory requirements.
Rugged construction, with timer, rated for continuous use
Shaking speed action is variable, simulating a snap-wrist motion for a swirling effect, but the oscillations are constant at 380 to 390 per minute
Degree of agitation, gentle to violent, is controlled by an adjustable lever with dial graduated from 1 to 10
Power unit has constant-speed motor and built-in timer, range to 60 minutes in 1-minute intervals
All are CSA approved
Side sleeves have interchangeable side arm shafts 19 mm diameter and clamps. Erlenmeyer flasks from 125 to 1,000 mL capacity can be shaken at one time without need for balancing. Full torque of the 1/8 HP (93 W) motor is always applied to the oscillating mechanism regardless of speed setting. Side arm shafts take 2-place clamps with slip-on fittings which provide capacity of 4 to 16 flasks, suitable bottles, test tubes, etc., with minimum diameter of 10 mm. Platform for attachment to top takes 6 to 10 Erlenmeyer flasks up to 5,000 mL , also sputum bottles, etc. Platform clamps of rubber slide in parallel grooves.

The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Burrell 75 Wrist-Action Shaker or copy the following into your browser address window: labequip.ca/stock/pictures/n2281.pdf
Made in USA.
This item ships from Swedsboro, NJ.

---