Cress Manufacturing C1228/PM6 Benchtop Furnace

Condition: New Brand new item from stock or on order from manufacturer
Stock #:
Dimensions (approx.):
12 x 20 x 8 in.H (inside)
25 x 34 x 28 in.H (outside)
Product Description
Heat treat (Hardening) furnaces have higher heat output power than draw furnaces due to the elevated temperatures at which they operate. Heat transfer to the tool steel is accomplished by a very efficient process called direct radiation. Temperature uniformity in these furnaces is best in the red heat range. Normal maximum temperature is 1232°C (2250°F). Optional 1316°C (2400°F.) maximum temperature versions are available (inquire for pricing).
These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300°F to 2250°F ±25°F are required. They are used for heat treating metal, assaying and all types of testing. 2400°F maximum temperature option available at additional cost.

Temperature Controls: Auto tuning microprocessor-based controller.
Heating elements: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates.
General construction: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800°F block insulation.
Safety switch: These models come equipped with dual door safety Switches. when the door is opened, power is disconnected from the heating Elements.
Door: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator.

~ Chamber Width: 12 in.
~ Chamber Length: 20 in.
~ Chamber Height: 8 in.
~ Overall Width: 25 in.
~ Overall Length: 34 in.
~ Overall Height: 28 in.
~ Max. Intermittent Temperature: 2250°F
~ Max. Continuos Temperature: 2000°F
~ Input Power: 8 kW
~ Embedded elements and Clean air exhaust system
~ High limit control
~ Inlet port for protective inert Atmosphere
~ Stands and quench tanks
This model is not programable; it is a single set point controller with a soak timer. If you need a programable controller you can upgrade to: PM4 (ask your sales rep for pricing).
Made in USA.
This item ships from Carson City, NV.
Request a Free Quote Right Now
Please fill in the form below to get a quote for the Cress Manufacturing C1228/PM6 Benchtop Furnace: