Hanna Instruments HI 83414 Digital Turbidity-Chlorine Meter

Condition: New Brand new item from stock or on order from manufacturer
Stock #:
Dimensions (approx.):
9"W x 8"D x 6"H (outside)
specify: 115 or 230 Volts, 50/60 Hz,
Product Description
The Hanna HI 83414 turbidity meter is a highly accurate dual parameter instrument that benefits from HANNA's years of experience. The HI 83414 successfully combines turbidity and colorimetric measurements to test the most important parameters of drinking water: turbidity and free/total chlorine. The meter is especially designed for water quality measurements, providing reliable and accurate readings on low turbidity and chlorine values. The HI 83414 meets and exceeds the requirements of USEPA and Standard Methods both for turbidity and colorimetric measurements. It also features 4 measuring ranges: Ratio Turbidity; Non-Ratio Turbidity; Free Chlorine; Total Chlorine.
With the powerful CAL CHECK function, reliable performance can be validated at any moment by using the exclusive HANNA readymade, NIST traceable standards. A one-point calibration can be performed using the same CAL CHECK standard.
Turbidity measurements can be made in the 0.00 to 4000 NTU (Nephelometric Turbidity Units) range when ratiometric measurements are used and in the 0.00 to 40.0 NTU range when non ratio method is used. These instruments have an EPA
compliance reading mode which rounds the reading to meet EPA reporting requirements.
A two, three, four or five-point calibration can be performed by using the supplied (<0.1, 15, 100, 750 and 2000 NTU) standards. If user prepared standards are used, the calibration points can be modified.
The HI 83414 also features USB PC connectivity (cable included), Backlit LCD, On-screen tutorial modes, Log and recall up to 200 measurements, Contextual help menus, Auto shut-off and Good Laboratory Practice capabilities.
The Hanna HI 83414-01 (115 V) or HI 83414-02 (230 V) is supplied with (5) sample cuvets and caps, calibration cuvets for turbidimeter and colorimeter (HI 83414-11), silicone oil (HI 93703-58), tissue for wiping cuvets, scissors, power cord and instruction manual.
The following link provides additional information from the instruction manual or manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
Hanna HI 83414 Digital Turbidity-Chlorine Meter or copy the following into your browser address window: labequip.ca/stock/pictures/n824.pdf
Depending on inventory and destination, this item ships from Richmond Hill, ON or Laval, QC.
Request a Free Quote Right Now
Please fill in the form below to get a quote for the Hanna Instruments HI 83414 Digital Turbidity-Chlorine Meter: