VELP Scientifica FIWE3 Crude Fiber Extraction Rack

Condition: New Brand new item from stock or on order from manufacturer
2 YEAR MANUFACTURER'S WARRANTY
Stock #:
N1738
Dimensions (approx.):
20.9 x 15.4 x 24.4 in.H (outside)
Electrical:
Specify 115 or 230V Volts, 50/60 Hz, 900W
Product Description
FIWE units are suitable for the crude fiber analysis and detergent fiber extraction according to official standard methods. These are Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods.

Vegetables and derived products are made up of substances belonging to different categories:
~ Carbohydrates, proteins, fats, mineral salts
~ A non-digestible component consisting of polymers (lignin, cellulose, hemicellulose, pectin) called 'fiber'
~ Nutritional importance for analysis: Too much fiber can cause digestive problems.
~ Low fiber intake creates irregularities in the functioning of the digestive tract
~ Authorities of almost all countries require manufacturers of food & feed products to declare the fiber content as part of the nutritional table

Weende Method: The oldest analytical procedure still in use today, in which fiber concentration is measured as crude fiber (CF)
Neutral Detergent Fiber (NDF) Method: A method developed by Van Soest, being now the most common measure of fiber used for animal feed analysis

High Performance
~ Rapid analysis - 2 hours vs. 6 hours with manual systems
~ Reliable results
~ High reproducibility
~ Back-pressure pump prevents clogging of crucibles

Versatile
~ Total raw fiber extraction using Weende technique
~ Neutral & acid detergent fiber with NDF, ADF, Van Soest extractions
~ Acid detergent lignin extraction with ADL & Van Soest methods
~ Fiber fraction analysis (cellulose, hemicellulose & pectin)
~ Links boiling, rinsing and filtration
~ Single or multiple samples can be processed

Full System
~ Reagent preheating on RC 2 hotplate (provided)
~ Same crucibles used for weighing, drying & washing - no loss

Recommendations
~ Combine with COEX for cold extraction before fiber analysis

SPECIFICATIONS:
~ Sample mass: 0.5 to 3g
~ Type of extractions: cold and hot extractions
~ Number of samples: FIWE 3 3 positions
~ Samples: individually processed
~ Sample quantity: from 005 to 3 g
~ Sample removal: air pump
~ Reagent discharge: peristaltic pump
~ Digital timer: 0 - 99 minutes with acoustic signal at the end
~ Temperature: electronic regulation
~ Reagents and cooling water: separated outlets

APPLICATIONS:
~ Raw fiber (Weende, Wijstrom)
~ Neutral or acid detergent treatment fiber (Van Soest)
~ Lignin, Cellulose, Hemicellulose
The following link provides additional information from the manufacturer's brochure. Click to open the PDF in a new window or right-click to download it:
VELP FIWE3 Crude Fiber Extraction Rack or copy the following into your browser address window: labequip.ca/stock/pictures/n1738.pdf
Made in Italy.
This item ships from Bohemia, NY.
Request a Free Quote Right Now
Please fill in the form below to get a quote for the VELP Scientifica FIWE3 Crude Fiber Extraction Rack: